ARTI – Ambient Room Temperature Incubator. ARTI goes where no incubator has gone before. ARTI heats and cools to maintain the setpoint. We were the first to bring this concept to the reptile incubating world. Don’t confuse the ARTI with other less precise models. Those other models are ± 2 or even 3 degrees C – that adds up to a total swing of 6 degrees around the setpoint. They may heat and cool but don’t do it with the precision you need for incubating reptile eggs. The ARTI performs at ± 1/2 degree C or better. That is at least 4 times better accuracy.
ARTI excells at maintaining setpoints close to the temperature of the room Arti is operating in. Even below the ambient room temperature!
Normal operating range is 20 degrees below the ambient room temperature to 20 degrees above the ambient room temperature. The controls can be set between 10 degrees Celcius and 40 degrees Celcius but the actual operating range is limited by the ambient room temperature.
- Researchers working with flies, crickets, mosquitoes, honey bees.
- Reptile researchers and breeders. Simulate hibernation – Diapause. Run the incubator at 50-55 degrees F – even though your room temperature is 75 degrees!
- Some reptiles need to be incubated at or below 80 degrees and that can be tough to do during the summer in warmer climates.
- Chameleon Breeders – Determine whether your eggs hatch as males or females by incubating at a certain temperature for males and different temperature for females.
- Bird Breeders: Gather eggs and store them up to a week at 55 degrees F before placing them in our GB-1 Gamebird incubator.
- Parrot breeders: Use as a portable brooder. Dual operation voltages. Works on both 120VAC and 12VDC
Inside: 16″ x 13″ x 10.75
Outside: 17h x 24w x 16d
All digital control. Temperature displayed in Celsius and Fahrenheit. High and Low temperature alarms. Passcode protection. Indicator on the display shows whether ARTI is heating or cooling or at the setpoint. 1 Adjustable shelf.
Hi/low temperature alarms, passcode protected temperature change. Polycarbonate door. Premium hinge and latch hardware. Digital humidity control available as an extra cost option. Interior LED Light Strip. Rear panel power-on switch. Easy to clean and easy to operate.
Digital Electronics, available digital humidity control, Hi/Low Temperature alarms
Fantastic Brooders for raising baby parrots and baby macaws. Time tested design (since 1998), All the features you need. Rugged and reliable. Built to last for many years. One year part and labor warranty.
The Chick Chalet 3 nursery brooder from Avey Incubator. Quality rugged cabinet and clear polycarbonate door. True digital controls. So easy to use, easy to clean. Precise. optional digital humidity control, High/low alarms, Direct entry of temperature and humidity (optional) setpoints. Passcode protection. Celsius and Fahrenheit readout on the alpha-numeric display. Easy to maintain, with built in extra features to head off mistakes before they happen.
17″ wide , 14.5″front to back, 16.5″high
28.5″wide, 14.5″ front to back, 16.5″ high.
32″wide, 16″ front to back X 18″ high
34.25″wide, 18″ front to back X 19.5″ high
There’s a short video featuring our Precision Puppy Incubators. The Chick Chalet shares most nearly all of the same features. Just some slight firmware and badging differences. See the basic operation and optional features demonstrated. https://youtu.be/kOR7ZIYhSnQ
Make a choice from each drop down box below to have the price calculated for you. Each incubator is built to order, installing the options you have selected.
If you see this message “Combination of product variants is not available” it means you forgot to make a choice in every drop down box – so be sure to make a selection in every drop down box then the price will calculate for you”.
A portable brooder to carry your animals to and from your work and home, perfect for zoo technicians needing to care for an animal through the night. Equipped with cords to allow powered operation in your car as well as serving as a 24/7 brooder in your nursery. Powered 12 volts dc or 120 volts ac.
Menu driven, direct entry controls make it easy to control the temperature on newly hatched babies, even from day one. Clear inner lid means you can see the babies without letting all the heat out. And when the lid is closed fresh air supplied through the air vent molded into the outer lid. And as the babies mature and you require a lower setting, the setting can be changed with a turn of a dial. Hi temperature alarm, a 2 line alpha numeric menu display for easy setup and adjustment of the brooder. Your last temperature setting is stored in memory and is remembered even if the power is off. The Cooler Brooder tells you what you need to know! Audible and visual indicators of alarm status. Our display also reads out in tenths of a degree Fahrenheit and Celsius. Large Size now includes an adjustable strap, for over the shoulder or to carry in one hand.
- Clear inner lid, keeps the heat in while you look at your chicks
- Digital Temperature Control
- Direct Entry Menu Driven Display
- Super Quiet Fan
- Large fresh air vent
- Easily Cleaned
- Password Protected Controls
- High Temperature Alarm
- Low Temperature Alarm
- Power Supply included
- Fresh air vent in back
- Carrying Strap
- Dual Voltage 120vac 12vdc All the necessary cords and connectors for your home or car included.
Large Brooder Blue, 34 qt cooler
outside dimensions – 21w” x 14h” x 14d”
inside dimensions – 17.5w” x 9.5h” x 10.75d”
The Digital Humidity Control is an extra cost option for incubators that don’t already have a humidity control. This option is available for our CC-32, CC20, Chick Chalet Series, and the Precision Puppy Incubators. Our Av-2 Parrot Precision Incubator and our Gamebird/Poultry Incubator already have this feature built in. It is not available for the ARTI Incubator, Rept100, Rept48, or Cooler Brooders
What you get: A digital readout of the humidity in the incubator, a water source in the form of an external cool mist humidifier, a hose to connect the humidifier to the incubator, and special control circuitry built into the incubator that measures the humidity, compares that measurement against the setpoint (your desired humidity level) and then turns on the humidifier when moisture is needed and turns it off when it isn’t.
You set the desired humidity level between 20%RH and 70% RH using the same process as setting the temperature on the incubator – you set it right on the display screen.
Must be ordered with one of the above listed incubators and is built in to the incubator. It is not available as a stand alone option.
Our nebulizer attachment allows the supplied medicine cup to mount to the incubator cabinet. Pressurized air attaches to the nebulizer with the supplied tubing. We don’t have a source for the nebulizer air pumps at this time. But if you choose one of our “complete oxygen setups” the oxygen concentrator can supply the air for this nebulizer as well. The air bubbles through the medicine you put in the cup – usually something like albuterol to aid in opening up lungs for better breathing. This attachment should be used with supervision from your vet. Your vet will tell you how much and how often to do the breathing treatments.
The nebulizer is available for the Chick Chalet series and Precision Puppy Incubators.