Product Category

Oxygen Port

OxygenPortOxygen port is the connection your oxygen tubing hooks up to. It can be fitted to all of our incubators except the ARTI Incubator. It is optional. If you order a complete oxygen setup with oxygen concentrator then this port is included.  You should only order this port if you have your own oxygen bottle or other source for oxygen.

Price: $20.00

Loading Updating cart…

Precision Puppy Incubator

Each incubator is built to order, installing the options you have selected. Additionally, we are experiencing high sales volume.  Presently 4 weeks lead time is needed to process and ship your order, plus up to 5 days for UPS Ground to deliver it to you. Expedited shipping is available but very expensive – plan on a minimum of $800. High sales volume expected to last through June.

Precision Puppy Incubator. Hi/low temperature alarms, passcode protected temperature change. Fan only function for when the heater is not needed. Polycarbonate door. Premium hinge and latch hardware. Digital humidity control available as an extra cost option. Interior LED Light Strip. Rear panel power-on switch. Easy to clean and easy to operate.

Incubator for newborn puppies and cats. If you’re breeding high value dogs or cats you’ll want to use one of these incubators to increase your success rate. Micro adjustable temperature control. Set the temperature you want (usually around 95 degrees F) in increments of 1/10 of a degree C. Hi/Low temp alarms, passcode protected setup so settings can’t be accidentally changed.

LED interior light strip with front panel control switch, rear panel power on/off switch, polycarbonate door with premium hinge and latch hardware.

You can set the incubator to run just the fan while still displaying the interior temperature. This setting is controlled by the on screen menu. A passcode must be entered to change to this setting so accidental changes to the temperature are avoided.

Two side mounted fresh air vents are standard. Digital on screen readout of humidity and Digital Humidity Control are available as extra cost options.

Sizes:
28.5″wide X 14.5″ front to back, 16.5″ high.
32″wide X 16″ front to back X 18″ high
34.25″wide X 18″ front to back X 19.5″ high

We also offer an incubator for transporting your new pups home from the vet. Check it out here

Due to Covid-19, our supplier for oxygen concentrators informed me production had been redirected to hospitals and nursing homes. Oxygen Concentrators are out of stock until further notice.

Make a choice from each drop down box below to have the price calculated for you.

If you see this message “Combination of product variants is not available” it means “make a choice in every drop down box”.

 

Product Options
Combination of product variants is not available

Price: from $929.00

Loading Updating cart…

Puppy Transport Incubator

Each incubator is built to order, installing the options you have selected. Additionally, we are experiencing high sales volume.  Presently 4 weeks lead time is needed to process and ship your order, plus up to 5 days for FedEx Ground to deliver it to you. Expedited shipping is available but very expensive – plan on a minimum of $800. High sales volume expected to last through June.

A portable incubator, 12 volt operation for your car, 120 volt operation for in the home. This is the product for transporting your new litter from the vet to home after delivery.

Precise temperature control, visual digital display of temperature in Celsius and Fahrenheit. Optional humidity readout. High and low temperature alarms. The picture shows a red color incubator but the available color is actually blue. Includes a clear inner lid so you can look in on your puppies without letting all the heat out.

This is the incubator that zoos use to transport their new babies back and forth when they babies need to be fed around the clock.

Perfect for the first couple of days, but your pups will quickly outgrow this incubator. Easy to carry, with built in handles.

outside dimensions – 23w” x 16h” x 15d”
inside dimensions – 19w” x 11.5h” x 11.5d”

Price: $689.95

Loading Updating cart…

RCAB 80 Reptile Cabinet Incubator

Our  Cabinet incubator for reptiles. Hold as many as 80 Ball Python eggs.

Complete with our acclaimed digital temperature thermostat with alphanumeric readout. Directly set the temperature on the Alphanumeric display.

Hi and Low temperature alarms. Passcode protection. Super quiet fan circulates the heat to ensure even heat distribution. Clear polycarbonate door.

Outside Dimensions 17’wide X 17.5’deep X 24’high . Shelf dimensions: 15.75′  X 14.75′

The picture shows plastic shoeboxes used as eggboxes. These are not included. The ideal size eggbox for this incubator is 13.25″ X 10 X 4″. But any box that fits will work. WalMart and Target both offer a variety of egg boxes that will fit. The box should have a tight fitting lid. Search popular reptile forums for tips on making your egg box. But the short version is to add peat moss soaked in water as a base medium in the box. Arrange your eggs in the box so that each egg is slightly touching the others. (When your ball python lays her eggs they will be in a pyramid. Optimum time to arrange the eggs in the egg box is just after they are laid.  At this time they are still able to be separated from each other  and arranged to get the maximum capacity in the egg box. After a few hours the eggs can’t be separated. If your miss this opportunity to separate the eggs then you can still move the pyramid of eggs to an extra deep eggbox, remove a shelf in the incubator and incubate the eggs. You just give up some capacity for this incubation period.

After talking to a hundreds ball python breeders over the years, this is our answer to what they’ve been asking for. But these aren’t just for Ball Pythons.  Any reptile egg will do just fine in here.  Set the temperature between 75 to 104 degrees Fahrenheit by directly entering the value you want on the display.

Now available with hinges on the side instead of on the bottom. In fact, that’s how we’ll build it unless you call us or shoot us an email saying you want the hinges on the bottom.

Each incubator is built to order, installing the options you have selected. Additionally, we are experiencing high sales volume.  Presently 4 weeks lead time is needed to process and ship your order, plus up to 5 days for FedEx Ground to deliver it to you. Expedited shipping is available but very expensive – plan on a minimum of $800. High sales volume expected to last through June.

Price: $689.00

Loading Updating cart…


Shopping Cart

Your shopping cart is empty
Visit the shop

Top